Project List (0)
MAXBLAST DUAL TRUMPET HORN
Stamped 304 Stainless Steel w/ Over Molded Motor Housing| Bulk | Display | Amps | dB | Frequency (Hz) | A | B | C | Volts | Weight | Std. Pack | Add to List |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 431520 | 431520-1 | 10 | 123 | 390±15/330±15 | 18-1/4" | 7" | 1-5/16" | 12 | 3.55 | 1 ea | |
| n/a | 431540-1 | 5 | 123 | 390±15/330±15 | 18-1/4" | 7" | 1-5/16" | 24 | 3.55 | 1 ea |
This MaxBlast Single Trumpet Horn features a prewired, sealed sound unit. After a 600 hour salt spray test, this electric horn was completely rust-free! Horn wiring has no polarity, negative or positive can be attached to either wire. Mounting bracket can be used as a wiring template. When installed, the trumpet should point slightly downward to permit water drainage. At 123 decibels and a frequency (Hz) of 390±15/330±15, this horn meets the US Coast Guard's COLREGS, US Inland Navigation Rules, Annex III Regulations, and ABYC standard A-23 for boats up to 20 meters (66’). Constructed with an over molded motor housing under a stamped 304 stainless steel exterior and diaphragm, which protects the internal components from corrosion. One-year warranty. NMMA Type Accepted #2577051 & 2577052. 12 or 24VDC.
⚠ Warning: Cancer and Reproductive Harm – www.P65Warnings.ca.gov
